1.Real measurements, drawing and recording the size → confirming color with the customers, edge type→drawing→cutting with marble machines→grinding edge with special milling machine→drying and cleaning the edge→painting the Quartz stone adhesive→fixed with special clamping fixture→cleaning the spare adhesive and water sanding→polishing→inspection the size.
2. Edge grinding and chamfering with hard diamond chip mill, the chip mill mesh is 50#, 150#, 300#, and milling from #50 to #300; then polishing, first to use 500#chip mill, following with 1000#, 2000#, 3000# to polish. Attention the diamond sawing knife should be hard. Sawing knife size is 3 inch or 4 inch, could be used according to the requirements.
3. When do connection, should be 45 degrees oblique cutting. Cutting knife must be diamond saw blade in high hardness, volume cut sales, and cutting under the cool water situation, and cutting speed is above 6000 rpm. The saw blade is lack of diamond content will make the quartz stone break due to the high-speed impact and cracking, and the type of blade is not durable. The high hardness diamond saw blade must have sand outlet hole, in case that quartz cutting sand can not be discharged in time to cause local heating to crack the quartz stone in the process of fabricate.