Opaly Composite Materials Co., Ltd.
ENGLISH
Menu
What are you looking for?

How to identify the quality of Quartz Stone

1. The better quality quartz stone is made by vacuum die casting, but the worse quality quartz stone is cast out by the production of heavy press plate. The density of the quartz stone is high, then the quartz stone will be more heavier in same size. Normally, the Quartz content of Quartz stone is from 80% to 94%, the higher content of quartz, the quality is better.

ow-to-identify-the-quality-of-quartz-stone

2. There are two normal kinds of thickness of quartz stone, 12mm and 15mm. Because hardness of quartz stone is higher than the solid surface sheet, so it is better to use the thickness 15mm, however, actually many manufacturers only produce 14mm or 13.5mm for the 15mm, but good manufacturers will not reduce only 1mm for save the cost of the quartz stone, so it is not recommended to choose the quartz stone which thickness doesn’t reach there 15mm.

quartz-stone-oq

3. Could test the hardness of the quartz stone by scratching with the key. the mainly composed of quartz stone is nature quartz(also named silicon), which hardness is only less than Diamond. There will be only tiny line on the good quality quartz stone surface after scratching by the key, and could be removed by scrubbing. But the worse quality quartz stone, there will be obvious scratch line white powder after scraping by key.

quartz-stone-oq

4. Good quality quartz stone will not be penetrated by the soy sauce after dripping the sauce on the quartz stone surface for few days. But the worse quality quartz stone will be penetrated for 1 days.

NEWS_RELATE
  • Note For Maintain Quartz floor

    Note For Maintain Quartz floor

    March 23, 20171.After paving completely, should not walk or operation on the quartz floor before it completely solid (at least 24 hours). 2.Quartz stone can be used normally after paving is completed and remove the...view
  • How to Distinguish Good Quartz Stone From the Bad

    How to Distinguish Good Quartz Stone From the Bad

    March 23, 2017Method 1:Evaluating the quality of quartz stone, it is important to recognize that degree of surface finish. To some extent, degree of finish represents the fouling resistance. The simplest method is ...view

CORPORATE_INFO

CONTACT_CAPTION

  • TEL:+86-13822241622
  • FAX:+86-2037638813
  • EMAILsandy.yuan@solidsurface-countertops.com
  • ADDRESS:No.12-3, Area A, Jingkou Park, Central Science and Technology Industrial Zone, Sanshui District, Foshan City, Guangdong Province, China